1 / 2Sold out · Ask us about restocking
Not available to order right now.
The Bonka 11.1V 5200mAh 35C 3S1P LiPo battery is for FPV aircraft, RC drones and quadcopters. The listing gives a voltage of 11.1V, a maximum continuous discharge of 35C and a maximum burst discharge of 70C.
It has a JST 4-pin balance connector and an XT60 female connector, with heavy-duty discharge leads that minimise resistance and sustain high current loads.
The page showed only 2 left in stock.
11.1V 3S1P: three cells in series.
5200mAh: long flight time for 3S.
35C continuous, 70C burst: high current.
XT60 female connector.
JST 4-pin balance connector.
Heavy-duty leads: lower resistance.
A LiPo (lithium polymer) drone battery stores energy in cells connected in series. The S number is the cell count, and each cell has a nominal voltage of 3.7V, so a 6S pack is 22.2V. Capacity in mAh tells you how much energy the pack holds, and the C rating tells you how much current it can deliver: multiply the C rating by the capacity in amp-hours to get the continuous current.
Match the pack to your aircraft. The voltage must suit your ESCs and motors, the connector must match your power system and the pack must be able to deliver the current that the propulsion system draws at full throttle. A pack that is asked for more current than its rating will heat up and lose life.
Handle LiPo batteries with care. Charge them with a balance charger set to the correct cell count and current, never leave them charging unattended, store them at a partial charge, never use a swollen or damaged pack and transport large packs in a fire-resistant container. Large packs also weigh a lot, so lift and mount them securely.
Log how each pack behaves over time. Note the resting voltage after a flight, how warm the pack is and how much capacity the charger puts back in. A pack that heats up more than usual, sags sooner or shows one cell drifting away from the others is telling you that it is ageing, and it should be retired before it fails in the air. Label your packs so you can rotate them evenly.
Drones and multirotors
RC aircraft, cars and boats
Robotics and DIY projects
Replacing a matching pack
Field and workshop use
The specification list gives 5200mAh, 3S1P, 11.1V and a discharge rating of 35C with a burst of 70C. Connector: XT60 female, JST 4-pin balance.
Check that your charger, ESC and connector suit this pack before you buy, and that the dimensions and weight suit your airframe.
Capacity: 5200mAh
Cells: 3S1P
Voltage: 11.1V
Discharge rate: 35C (burst 70C)
Configuration: 3S1P
Connector: XT60 female, JST 4-pin balance
Bonka 5200mAh 35C 3S1P 11.1V LiPo battery
Pilots and builders who need a 5200mAh 3S1P pack for their drone or RC model.
5200mAh.
11.1V (3S1P).
35C, burst 70C.
XT60 female, JST 4-pin balance.
Yes, it is a rechargeable lithium polymer pack.
Bonka 5200mAh 35C 3S1P 11.1V LiPo battery
| Brand | Bonka |
|---|---|
| Capacity | 5200.000000 mAh |
| Cell Configuration | 3S1P |
| Discharge Plug | XT60 |
| Discharge Rate | 35C continuous, 70C burst |
| Nominal Voltage | 11.1V |
| Selling unit | PCS |
