1 / 4Sold out · Ask us about restocking
Not available to order right now.
The 2.2-inch Pavo20 Pro is a lightweight freestyle brushless whoop with expanded compatibility with both the DJI O3 Air Unit and the new DJI O4 Air Unit Pro, all under 150g. The listing says it pairs LAVA 1104 7200KV brushless motors and Gemfan 2218 3-blade props with an aerodynamic frame that adds an 8 to 11% thrust boost.
Flight time reaches up to 6 minutes 40 seconds with the LAVA 3S 550mAh battery. The injection-moulded HD VTX bracket has dual camera mounting holes for DJI O3 and O4 Pro wide-angle shooting and optimised antenna fixing for a stable signal, and it works with rubber dampers to remove jitter and vibration.
The modular bracket system lets you swap between the O3 Air Unit bracket and the O4 Air Unit Pro bracket.
Lightweight powerhouse: a 2.2-inch pocket-size cinewhoop under 150g.
Freestyle propulsion: LAVA 1104 7200KV motors and Gemfan 2218 3-blade props.
Extended flight: up to 6 minutes 40 seconds on a LAVA 3S 550mAh 75C battery.
Cinematic stability: injection-moulded HD VTX bracket and rubber dampers.
Modular HD VTX bracket: swap between O3 and O4 Pro brackets.
ELRS or SBUS versions: choose the receiver type.
A brushless whoop is a small, ducted FPV quadcopter designed to fly safely close to people and obstacles. Ducts around the propellers protect the blades and the objects they touch, while brushless motors give much more power and efficiency than the brushed motors in older micro drones. An all-in-one flight controller combines the flight board, ESCs and receiver in one small board to save weight.
You fly it by looking through FPV goggles or a screen that shows the video from the onboard camera. Start in an open space, practise with a simulator first and use turtle mode to flip the drone back over after a crash. Whoops use 1S to 3S batteries, so charging with the correct charger and connector is essential.
Keep the propellers and motors clean, check the screws after every few flights and replace worn propellers. Follow the rules for flying near people, and never fly over crowds.
Cinematic FPV with the DJI O4 Air Unit Pro
DJI O3 pilots entering FPV freestyle
Lightweight, pocket-size flying
ELRS radio systems
Sub-250g freestyle
The specification list gives a wheelbase of 93.7mm, an XT30 battery connector, a battery slot of 20mm by unlimited height, an F4 2-3S 20A AIO flight controller, the Pavo20 Pro brushless frame, LAVA 1104 7200KV motors, Gemfan 2218 3-blade props on a 1.5mm shaft, a flight time of 6 minutes 40 seconds with a LAVA 3S 550mAh battery and a weight of 71g for the O4 Pro PNP version. The receiver versions are ELRS and SBUS.
The package contains the whoop, an O4 Air Unit Pro bracket, an HD VTX bracket screw pack, a COB LED strip kit (ice blue), four Gemfan props, a Type-C adapter board and a 4-pin adapter cable. A battery, radio and DJI air unit are not listed.
Wheelbase: 93.7mm
Battery connector: XT30
Battery slot: 20mm x unlimited height
FC: F4 2-3S 20A AIO
Motors: LAVA 1104 7200KV
Props: Gemfan 2218 3-blade (1.5mm shaft)
Flight time: 6'40'' (LAVA 3S 550mAh)
Weight: 71g (O4 Pro PNP version)
Receiver versions: ELRS, SBUS
1 x Pavo20 Pro brushless whoop quadcopter
1 x O4 Air Unit Pro bracket
1 x HD VTX bracket screw package
1 x Pavo Series COB LED strip accessory kit (ice blue)
4 x Gemfan 2218 3-blade propellers (1.5mm shaft)
1 x PCBA Type-C adapter board
1 x 4-pin adapter cable
DJI O3 or O4 Pro pilots who want a compact, lightweight freestyle whoop.
A 2.2-inch brushless whoop with a 93.7mm wheelbase.
The DJI O3 Air Unit and the DJI O4 Air Unit Pro.
Up to 6 minutes 40 seconds on a 3S 550mAh battery.
ELRS and SBUS versions.
71g for the O4 Pro PNP version.
LAVA 1104 7200KV.
| Brand | BetaFPV |
|---|---|
| Frame Type | Brushless Whoop |
| Motor | LAVA 1104 7200KV |
| Onboard Flight Controller | F4 2-3S 20A AIO |
| Protocol | SBUS Compatible |
| Receiver | ELRS or SBUS version |
| Weight | 71.000000 g |
| Wheelbase | 93.700000 mm |
| Selling unit | PCS |
