1 / 4Sold out · Ask us about restocking
Not available to order right now.
The Cetus Pro is a brushless quadcopter with a Lite 1-2S Pro brushless flight controller and a 12A ESC. It has 1102 18000KV brushless motors and 40mm 3-blade props, which the listing says are capable of diverse freestyle tricks.
It has a C02 FPV micro camera and a 25mW video transmitter. The positioning system is listed as optical flow, barometer and laser, and the flight time is 4 to 5 minutes with a BT2.0 450mAh 1S battery.
The features are a brushless power system for better manoeuvrability, turtle mode and three flight modes, a PA12 frame with 360-degree whoop protection and emergency landing protection. The source page marks the product as discontinued.
Brushless power system: improved manoeuvrability.
Turtle mode and three flight modes: flip the drone over after a crash.
PA12 frame: 360 degree whoop protection.
Emergency landing protection: helps in a signal loss.
Positioning: optical flow, barometer and laser.
C02 FPV camera and 25mW VTX: a complete FPV video system.
A brushless whoop is a small, ducted FPV quadcopter designed to fly safely close to people and obstacles. Ducts around the propellers protect the blades and the objects they touch, while brushless motors give much more power and efficiency than the brushed motors in older micro drones. An all-in-one flight controller combines the flight board, ESCs and receiver in one small board to save weight.
You fly it by looking through FPV goggles or a screen that shows the video from the onboard camera. Start in an open space, practise with a simulator first and use turtle mode to flip the drone back over after a crash. Whoops use 1S to 3S batteries, so charging with the correct charger and connector is essential.
Keep the propellers and motors clean, check the screws after every few flights and replace worn propellers. Follow the rules for flying near people, and never fly over crowds.
Beginner and intermediate FPV whoop flying
Indoor freestyle
Learning turtle mode and flight modes
Flying with optical flow position hold
Practising in small spaces
The specification list gives the positioning system as optical flow, barometer and laser, a Lite 1-2S Pro brushless FC, a 25mW VTX, a C02 FPV micro camera, 1102-18000KV brushless motors, 40mm 3-blade props with a 1.5mm shaft hole, a takeoff weight of 33.19g without battery, a BT2.0 450mAh 1S 75C battery, a flight time of 4 to 5 minutes and a flight distance of 80m.
The package line lists only the BETAFPV Cetus Pro brushless quadcopter, and the source page shows the product as discontinued, so check availability before ordering.
Positioning: optical flow / barometer / laser
Flight controller: Lite 1-2S Pro brushless FC
VTX: 25mW
Camera: C02 FPV micro camera
Motors: 1102-18000KV brushless
Propellers: 40mm 3-blade, 1.5mm shaft hole
Takeoff weight: 33.19g (without battery)
Battery: BT2.0 450mAh 1S 75C
Flight time: 4-5 minutes
Flight distance: 80m
1 x BETAFPV Cetus Pro brushless quadcopter
New FPV pilots who want a small brushless whoop with position hold assistance.
1102-18000KV brushless motors.
4 to 5 minutes.
A C02 FPV micro camera.
25mW.
33.19g without a battery.
The source page marks it as discontinued.
| Brand | BetaFPV |
|---|---|
| Flight Time | 4-5 minutes |
| Motor | 1102-18000KV |
| Onboard Flight Controller | Lite 1-2S Pro brushless FC |
| Video Transmitter | 25mW |
| Weight | 33.190000 g |
| Selling unit | PCS |
