1 / 3Sold out · Ask us about restocking
Not available to order right now.
The Axldrone PDB 200A is a heavy-duty power distribution board designed for high-voltage industrial UAVs. It supports an input of up to 60V and 200A continuous current, and it has anti-spark soft switching, integrated current and voltage sensing and dual DC-DC converters (5V and 12V).
The listing describes it as 100% made in India, for reliable, high-performance power management in professional robotics and drone builds.
Four high-capacity XT90 connectors give secure connections for heavy-duty ESCs, and the board includes a built-in precision analogue voltage and current sensor for the flight controller.
200A continuous current: designed for demanding industrial drones.
Anti-spark soft switching: protection for sensitive inductive motor loads.
Four XT90 connectors: secure connections for heavy-duty ESCs.
Precision voltage and current sensing: analogue outputs for flight controllers.
Dual DC-DC converters: stable 5V at 5A and 12V at 5A outputs.
Made in India: manufactured by Axldrone.
A power distribution board (PDB) takes the current from the flight battery and shares it between the ESCs and other parts of the aircraft. Instead of soldering every ESC lead to a single battery lead, you solder them to wide copper pads on the board, which handles the current safely and keeps the wiring tidy. Many boards also include voltage regulators, so that a flight controller, receiver or camera can be powered from the same board.
When you choose a PDB, check that its current rating comfortably exceeds the total of all your ESCs at full throttle, that its input voltage range covers your battery and that the pad spacing and connectors match your frame and wire gauge. Solder with a hot iron and plenty of flux so that each joint flows, and cover joints with heat-shrink.
Check every joint for cold solder and shorts before you connect a battery, and use a smoke stopper for the first power-up. A small hairline crack in a solder joint can heat up under load and fail, so re-inspect the board after crashes.
High-voltage industrial UAVs
Heavy-lift agricultural drones
Professional robotics power systems
Systems that need 5V and 12V supplies on the board
Builds with several heavy ESCs
The specification list gives a continuous current of 200A with an integrated current sensor, an input voltage range of 20V to 60V DC, four XT90 connectors and 2.54mm terminals for power output, and dual DC-DC converters (5V/5A and 12V/5A).
The package contains one PDB 200A board and a documentation and wiring guide. This product page showed the item as out of stock when it was read, so check availability before ordering.
Brand: Axldrone
Continuous current: 200A with integrated current sensor
Input voltage: 20V-60V DC
Power outputs: 4 x XT90 and 2.54mm terminals
Regulation: dual DC-DC converters (5V/5A, 12V/5A)
Protection: anti-spark soft switching
1 x PDB 200A high-current distribution board
1 x documentation and wiring guide
Builders of high-voltage industrial UAVs who need a made-in-India 200A PDB with sensing and regulators.
200A continuous.
20V to 60V DC.
Dual DC-DC converters: 5V/5A and 12V/5A.
Four.
Yes, it has an integrated analogue voltage and current sensor.
The board and a documentation and wiring guide.
| Brand | AXL |
|---|---|
| Connector | 4 x XT90 and 2.54mm terminals |
| Continuous Current | 200.000000 A |
| Input Voltage | 20-60V DC |
| Output Voltage | 5V/5A and 12V/5A |
| Selling unit | PCS |
