1 / 5Sold out · Ask us about restocking
Not available to order right now.
This is a universal glass fibre flight controller anti-vibration set for APM, KK, MWC and Pixhawk boards. It provides free camera mounting and flight controller isolation and absorbs vibration, and its centre-supported plate is ideal for sensitive electronics and cameras.
The flush, flat-bottom mounting allows bolt-on or tape-style attachment. The rectangular mount can be used on many flight controllers, such as APM and Pixhawk, and also on a Mobius camera or even a GoPro turned sideways. Extra mounting tape is included.
It suits open source flight controllers such as APM 2.5, 2.6 and 2.8, KK, MWC and Pixhawk 2.4.
Universal glass-fibre set: made for APM, KK, MWC and Pixhawk.
Vibration isolation: soft dampers absorb vibration.
Centre-supported plate: ideal for sensitive electronics and cameras.
Flush flat-bottom mount: bolt or tape attachment.
Flexible use: flight controllers, Mobius cameras or a sideways GoPro.
Mounting tape included: for tape-style attachment.
The accelerometers and gyros inside a flight controller pick up every vibration from the motors and propellers. Too much vibration confuses the controller, which can lead to poor altitude hold, drifting, or even flyaways. A soft mount with dampers filters out the high-frequency vibration before it reaches the sensors.
A two-plate design like this one has a bottom plate that fixes to the frame and a top plate that carries the board, with rubber dampers between them. The top plate floats on the dampers, so the vibration is reduced.
Keep wires loose and route them so that they do not bridge the two plates, because a tight cable can carry vibration around the dampers. Check the damper condition periodically, since rubber can harden or tear with age.
Isolating APM and Pixhawk flight controllers
KK and MWC boards on multirotors
Mounting a Mobius or GoPro camera
Reducing vibration in a build
Sensitive payload mounting
The listing gives two frame sizes, 90 x 60 x 2mm and 100 x 70 x 2mm, with a shock absorber size of 10 x 12mm (diameter x height). The weight is 25 grams and the colour is black.
The set suits APM 2.5, 2.6 and 2.8, KK, MWC and Pixhawk 2.4 boards. The package contains one set.
Colour: black
Material: glass fibre
Frame 1 size: 90 x 60 x 2mm
Frame 2 size: 100 x 70 x 2mm
Shock absorber size: 10 x 12mm (D x H)
Weight: 25g
1 x anti-vibration shock absorber for APM/KK/MWC/Pixhawk
Multirotor builders who want to isolate a flight controller or a camera from motor vibration.
APM 2.5/2.6/2.8, KK, MWC and Pixhawk 2.4.
Yes, a Mobius camera or a GoPro turned sideways.
Glass fibre.
25 grams.
With bolts or mounting tape.
90 x 60 x 2mm and 100 x 70 x 2mm.
| Brand | Generic |
|---|---|
| Color | Black |
| Frame Sizes | 90x60x2 mm and 100x70x2 mm |
| Material | Glass fibre |
| Weight | 25.000000 g |
| Selling unit | PCS |
