A2212 1400KV Brushless Motor and SimonK 30A ESC with 1045 Propeller Combo Set

A complete propulsion starter set

This combo set bundles an A2212 1400KV brushless motor with a SimonK 30A ESC and 1045 propellers. It is intended as a complete drone motor setup for RC drone applications, so you do not need to source each part separately.

An A2212 at 1400 KV is a flexible choice for lightweight quadcopters and RC airplanes, and a 30 A SimonK ESC is a common match that leaves room for the motor's current draw.

Getting it running

Full specifications and an exact parts count are not published, so check the contents on arrival. Connect the ESC to the motor (swap any two of the three wires if the motor turns the wrong way), calibrate the ESC to your flight controller or receiver, and test the motor on the bench with the propeller removed.

Fit the 1045 propeller only once you are happy with the direction, keep fingers clear, and balance the propeller for smooth running. Use a 2S to 3S LiPo battery and check that its connector matches the ESC's.

Who it is for

Beginners and tinkerers building a first quadcopter or RC plane, and anyone who wants a quick replacement propulsion set.

Making the most of a combo

Combo sets are a good way to learn how a propulsion system works. Once the motor is running, use a watt meter to learn how much current a full-throttle run draws with the 1045 propeller, and how much lower the hover current is. That information helps you to choose a battery and to know when a component is being pushed too hard.

Questions buyers ask

What is in the combo?

An A2212 1400KV motor, a SimonK 30A ESC and 1045 propellers.

Which battery should I use?

The catalog lists 2S to 3S LiPo.

What propeller size comes with it?

1045 (10 inch).

Do I need to calibrate the ESC?

Yes, calibrate it to your flight controller or receiver before flying.