1 / 2Sold out · Ask us about restocking
Not available to order right now.
The A2212 1400 KV is a brushless outrunner designed for RC drones, quadcopters and DIY UAV projects. It delivers smooth performance, high torque and reliable thrust for stable flight, and it is light for its power.
It is a popular middle setting in the A2212 family: high enough in KV to spin typical 8 to 10 inch propellers well, yet gentle enough on 2S to 3S packs for general-purpose quadcopters and RC airplanes.
The motor operates from 7.4 to 11.1 V, so it is made for 2S to 3S LiPo batteries. Its shaft diameter is 3.17 mm, its current handling capacity is 16 A, its maximum efficiency current is about 6 to 12 A, its no-load current is 700 mA at 10 V and its maximum efficiency is up to 80%. The maker recommends a 30 A ESC.
A prop adapter is included in the package. For a quadcopter, fit two clockwise and two counter-clockwise propellers and check motor direction with the propellers off before you power up.
Builders of low-cost quadcopters, RC airplanes and DIY UAV projects who want a proven motor size with plenty of community knowledge.
Solder or plug the motor leads to the ESC, swap any two wires if the motor turns the wrong way and secure the motor with thread-locked screws. Balance the propeller, confirm that the shaft adapter grips firmly and keep the wires away from spinning parts. Test the setup at low throttle first, then check the temperature after a short hover.
1400 KV.
7.4 to 11.1 V, or 2S to 3S LiPo.
The maker suggests a 30 A ESC.
The motor and a prop adapter.
3.17 mm.
| Brand | Generic |
|---|---|
| KV Rating | 1400.000000 KV |
| Operating Voltage | 7.4V-11.1V |
| Shaft Diameter | 3.170000 mm |
| Selling unit | PCS |
