1 / 5Sold out · Ask us about restocking
Not available to order right now.
The 9450 carbon fiber propeller is sold as a pair for F450 and F550 drone frames. The page describes a balanced design with minimal weight, ideal for do-it-yourself quadcopters, multi-rotors and hexacopters.
The page says washers are not necessary when using 2212 motors, and that the props suit quadcopters, multirotor drones, fixed-wing drones, single-rotor helicopters and hybrid fixed-wing VTOL aircraft. It lists no other spec values. The page showed 33 in stock at Rs 185 (SKU TIFQC0112).
Balanced design with minimal weight: as listed.
For F450 and F550: quadcopter and hexacopter builds.
Carbon fiber: as named on the page.
No washers with 2212 motors: per the listing.
1 pair: sold as one pair.
Broad platform use: quadcopters, multirotors, fixed-wing and VTOL.
A drone propeller converts motor torque into thrust. Each blade is an aerofoil: as the motor spins the prop, the blades push air downward and the reaction force lifts the aircraft. Diameter and pitch set how the prop behaves. A larger diameter moves more air and suits efficient, lower-RPM flight, while a higher pitch moves the aircraft forward faster per revolution but demands more current from the motor.
Multirotors use pairs of props that spin in opposite directions. Clockwise (CW) and counter-clockwise (CCW) props cancel out the torque reaction so the aircraft does not spin, and the flight controller changes individual motor speeds to steer. Always fit each prop on the motor that turns the matching direction, and check your flight controller motor-direction settings before the first flight.
Fit and balance matter. The hub hole or shaft size must match your motor shaft, and the prop should sit flat and tight with the retaining nut fully secured. Check every blade for chips, cracks and bends before each flight, because a damaged prop causes vibration that shows up as jello in the video and extra heat in the motor. Replace props after a hard crash instead of flying on a damaged set.
Keep a few spare sets in your kit. Props are the part most likely to break in a crash, and swapping a damaged one takes only a minute. When you replace a prop, replace it with the same size, pitch and blade count as the rest of the set so that all motors produce matching thrust.
F450 quadcopters
F550 hexacopters
DIY multirotors
2212 motor builds
Spare props
The page says no washers are needed with 2212 motors. It does not list a shaft size, weight or pitch beyond the 9450 name, so check before you buy.
The product is sold as one pair.
Type: 9450 carbon fiber propeller
Pack: 1 pair
For: F450 / F550 drones
Washers not required with 2212 motors
1 x 9450 carbon fiber propeller pair
F450 and F550 builders who need spare props.
F450 and F550 drones.
The page says washers are not necessary with 2212 motors.
One pair.
| Brand | Generic |
|---|---|
| Diameter | 9.400000 in |
| Material | carbon fiber |
| Pitch | 5.000000 in |
| Selling unit | PCS |