Sold out · Ask us about restocking
Not available to order right now.
The 7Semi STM32C011J6M6 Micro Development Board is built around the STM32 microcontroller family, offering advanced capabilities in a compact, portable design for embedded systems projects. It uses an ARM 32-bit Cortex-M0+ CPU running at up to 48 MHz.
Onboard memory is 32 Kbytes of flash with protection and 6 Kbytes of SRAM with a hardware parity check, and a CRC calculation unit is included for hardware-assisted data integrity checking.
Voltage range is 2.0 to 3.6 V. Connectivity is flexible, with SPI, I2C, UART and GPIO interfaces, and SWD (Serial Wire Debug) is available for debugging. The board comes pre-loaded with a voltage regulator and user LEDs, and is aimed at learning embedded development, rapid prototyping, IoT projects and wearable electronics.
Flash a simple blink or UART example first to confirm the board, toolchain and debugger all talk to each other, before moving on to your own peripherals. Keep the SWD or USB connection short and shielded if you see intermittent flashing failures.
Students and hobbyists learning STM32 development, and makers who want a small, low-cost board for quick prototypes and wearable-scale projects.
Use STM32CubeIDE or a compatible ARM GCC toolchain to build and flash your first project, and confirm the SWD connection with a debug probe before writing application code. The board's pre-loaded voltage regulator means you can power it from a simple USB source without extra components.
The STM32C011J6M6, with an ARM Cortex-M0+ core up to 48 MHz.
32 Kbytes of flash and 6 Kbytes of SRAM.
2.0 to 3.6 V.
SPI, I2C, UART and GPIO.
Through the SWD interface.
| Brand | 7Semi |
|---|---|
| Flash Memory | 32KB |
| MCU / Processor | STM32C011J6M6 |
| Operating Voltage | 2.0-3.6V |
| RAM | 6KB |
| Selling unit | PCS |
