Sold out · Ask us about restocking
Not available to order right now.
The DMG10600C070_03WTC is a 7.0 inch 1024 x 600 IPS UART LCD display developed by DWIN, with capacitive touch, 16 MB of flash, a buzzer and an SD interface. It is an HMI display, meaning it stores and draws the screens itself.
Its 24-bit (8R8G8B) colour and wide 85/85/85/85 degree viewing angles give a clear picture from almost any angle.
The display area is 154.2 x 85.9 mm and the brightness is 270 nit. The supply is 5 V at 1 A DC, the interface is TTL/RS232 and the SD interface uses FAT32. The buzzer is a 3 V passive type and the unit weighs 260 g.
HMI displays run their own screen software, so your microcontroller only sends short serial commands. Design the pages in DWIN's DGUS tool, copy the files to a FAT32 SD card to load them and test the display on a bench with a stable supply before you fit it into a product.
Developers who want a larger capacitive screen that runs from a 5 V supply, for instance in embedded boards and small equipment.
This model runs from 5 V, so it can share a logic supply with your controller, but the display draws up to 1 A, so use a supply that can provide it. Keep the serial connection short and check the baud rate in the DGUS configuration. Load a simple test page first to confirm the touch and the serial link before you design a full interface.
7.0 inches and 1024 x 600.
Capacitive.
5 V at 1 A DC.
270 nit.
260 g.
| Brand | DWIN |
|---|---|
| Display Resolution | 1024x600 |
| Flash Memory | 16MB |
| Power Supply | 5V 1A DC |
| Screen Size | 7.0 inch |
| Touch Screen | Capacitive |
| Weight | 260.000000 g |
| Selling unit | PCS |
