Sold out · Ask us about restocking
Not available to order right now.
This DWIN-developed HMI display has a 7.0 inch, 1024 x 600 screen with RS232/RS485 connectivity, a resistive touchscreen and 16 MB of flash memory with SD card support. The model is DMG10600T070_A5WTR, and it comes with a shell.
A T5L2 dual-core 8051 processor runs the display, which keeps power use low while giving good performance for the price.
The display area is 154.20 x 85.88 mm, with 24-bit colour, a wide 85-degree viewing angle and a brightness of 250 nit. Power is 12 V at 1 A. Memory is 16 MB, expandable to 64 MB, and there is an SD card interface (FAT32), a built-in 2 W speaker and a real-time clock with super-capacitor backup. The front is rated IP65 and the unit weighs 500 g.
Use DWIN's design software to create screens, load them by SD card and control the display from a microcontroller or PLC over RS232 or RS485. Mount the shell with the front facing out and seal the panel opening so the IP65 rating applies.
Builders of machines, instruments and industrial controllers who need a robust, ready-to-use touch panel.
Cut the panel opening to the size in the manufacturer's drawing, seal the gasket evenly and tighten the mounting hardware in a cross pattern. Keep the 12 V supply well regulated and use the RS485 lines for longer cable runs. Test the touch calibration with a stylus before you finish the enclosure.
7.0 inches and 1024 x 600.
RS232, RS485 and an SD card interface.
The front is rated IP65.
16 MB, expandable to 64 MB.
12 V at 1 A DC.
| Brand | DWIN |
|---|---|
| Display Interface | RS232/RS485 |
| Display Resolution | 1024x600 |
| Flash Memory | 16MB (expandable to 64MB) |
| Power Supply | 12V 1A DC |
| Screen Size | 7.0 inch |
| Touch Screen | Resistive |
| Weight | 500.000000 g |
| Selling unit | PCS |
