1 / 2Sold out · Ask us about restocking
Not available to order right now.
This 4x6cm universal PCB prototype board gives a step up from a solderless breadboard when a circuit is ready to move from testing into a more permanent build. It's constructed from robust FR4 material, the same glass-fiber-reinforced base material used in professionally manufactured circuit boards, and uses a double-sided layout, meaning both sides of the board carry copper pads and traces, which increases circuit density and gives more routing flexibility than a single-sided perfboard.
Holes are precision-drilled at the standard 0.1 inch (2.54mm) pitch, matching the lead spacing of essentially every common through-hole component, header and connector used in hobby electronics, so parts drop straight into place without needing to bend leads to fit.
The board uses a durable HASL (hot air solder leveling) finish, which coats the exposed copper pads in a thin, even layer of solder, giving excellent solderability and some resistance to oxidation compared to bare copper. Its 4cm by 6cm size is a practical, commonly used dimension, big enough for a reasonably complex small circuit while staying compact enough to fit inside most project enclosures.
Because it's a genuine PCB material rather than a plastic perfboard, it holds up well to repeated soldering and desoldering, and its rigidity makes it a dependable base for a circuit that will be handled, mounted or moved around after assembly.
Anyone moving a tested breadboard circuit into a permanent, soldered build, or building a small custom circuit from scratch, will find this board's standard hole spacing and double-sided routing options a solid, general-purpose choice.
FR4 (glass fiber).
Double-sided.
Standard 0.1 inch (2.54mm) pitch.
A durable HASL finish for solderability.
4cm by 6cm.
| Brand | Generic |
|---|---|
| Material | FR4 |
| Selling unit | PCS |
