2807 1300KV Brushless Motor 2-6S, 4mm Bearing Shaft

A 2807 for 6 to 7 inch racing and long-range quads

This 2807 1300KV motor is a high-performance option for FPV racing drones and multicopters, and it works across a versatile 2S to 6S battery range. It emphasises precision control, efficiency and speed for enthusiasts and DIY builders putting together custom racing setups.

It delivers up to 1400 W on 6S, which the maker describes as rapid acceleration, and is engineered for quick bursts, high torque and sustained race performance.

The numbers behind it

The motor is 33.5 mm in diameter with a 4.0 mm shaft, a maximum continuous power of 1400 W for 180 seconds, a maximum thrust of 1950 g, M3 mounting holes and a 12N14P frame. Resistance is a low 60 milliohm. It is recommended for 6 to 7 inch propellers.

Choose an ESC that can handle the peak current at your battery voltage and check thrust and current with your own propeller. Fit the mounting screws with thread lock, and check the bell spins freely after any crash.

Who it is for

Pilots building a 6 or 7 inch racing or long-range quad who want strong power at a modest price.

Tuning tips for high-power builds

At 1400 W a motor is producing a lot of heat and current, so keep the ESC and wires cool, use good quality connectors and solder joints, and mount a low-ESR capacitor near the ESC to protect against voltage spikes. Start with a conservative propeller pitch, run a bench test with a watt meter and confirm the motor temperature after a short hover before pushing to full throttle.

Questions buyers ask

What KV rating does it have?

1300 KV.

Which batteries can I use?

2S to 6S.

How much thrust does it give?

Up to 1950 g.

Which propellers suit it?

6 to 7 inch.

What is the shaft diameter?

4 mm.