1 / 2Sold out · Ask us about restocking
Not available to order right now.
The 2204 260KV brushless gimbal motor is designed to give smooth, precise stabilisation for a GoPro 3/3+ or similar action camera. It fits into a 3-axis gimbal set-up so that footage stays smooth even during high-action shots.
The listing describes precision engineering with exceptional torque and responsiveness, a compact and lightweight body of 24 plus or minus 0.5g and a 260KV rating for rapid acceleration.
A 20cm cable gives ample length for flexible mounting inside the gimbal.
Precision engineering: exceptional torque and responsiveness.
Compact and lightweight: 24 +/- 0.5g.
260KV rating: rapid motor acceleration.
20cm cable: flexible gimbal mounting.
Made for action cameras: GoPro 3/3+ and similar.
A brushless gimbal keeps a camera pointing steadily while the aircraft moves. A controller board reads an inertial sensor mounted on the camera and drives brushless motors on each axis to cancel out any rotation. Because gimbal motors are wound for smooth, low-speed torque and not for speed, they hold the camera steady with very little vibration and noise.
Gimbal quality depends on the whole system: balance, damping and controller tuning matter as much as the motors themselves. A camera that is not balanced on its axes forces the motors to work harder, heats them up and can cause jitter, so balance the camera carefully before you tune anything.
Also isolate the gimbal from airframe vibration with soft damping mounts, keep motor wires away from the sensor and never power the gimbal with the camera locked or blocked, as the motors can overheat when they cannot move.
3-axis gimbals for GoPro 3/3+ and similar cameras
DIY camera stabilisers
Aerial photography rigs
Replacement gimbal motors
Smooth action camera footage
The listing gives a shaft diameter of 3.4mm, a size of about 27.85 x 13.1mm and a 20cm cable. Check that your gimbal frame and controller match these dimensions before ordering.
The page does not list a package contents list or a controller recommendation, so pair the motor with a gimbal controller that can drive small, high-resistance motors of this size, and confirm that the winding and cable suit your frame before you commit to a build.
Brand: ReadytoSky
KV rating: 260KV
Weight: 24 +/- 0.5g
Shaft diameter: 3.4mm
Size: 27.85 x 13.1mm (approx.)
Cable length: 20cm
1 x 2204 260KV brushless gimbal motor
DIY gimbal builders who need a small, light motor for GoPro-class cameras.
GoPro 3/3+ or similar action cameras.
260KV.
24 +/- 0.5g.
3.4mm.
20cm.
About 27.85mm x 13.1mm.
| Brand | Readytosky |
|---|---|
| Cable Length | 20 cm cm |
| Dimensions | 27.85 x 13.1 mm |
| KV Rating | 260.000000 KV |
| Shaft Diameter | 3.400000 mm |
| Weight | 24.000000 g |
| Selling unit | PCS |
