Standard checkout available. Verified maker dispatch.
This 2200 KV A2212 is built with high-end magnets, a high pole count and a custom motor mount, and it is designed purely for multi-rotor applications. The integrated prop adapter is set for a 4 mm shaft with sleeves for 5 mm and 6 mm props, and a built-in aluminium mount makes it easy to fit on a quadcopter frame.
At 2200 RPM per volt, the motor spins quickly and suits small-diameter propellers and lightweight airframes. The listed model name is A2212 10T, while the title says 6T, so treat the KV rating as the reliable identifier.
The specifications list 2S to 3S LiPo compatibility, a shaft diameter of 3.17 mm, a current handling capacity of 16 A, a maximum efficiency current of 6 to 12 A, a no-load current of 700 mA and a maximum efficiency of 80%. Pair it with an ESC that is rated above the current your propeller will draw, and be careful with large props, because a high-KV motor with a big propeller will draw more current than its rating.
Balance your propellers, secure the mounting screws with thread lock, and let the motor cool between hard test runs.
Builders of compact, quick multirotors and hobby aircraft who want a low-cost, high-RPM outrunner.
High-KV motors spin very fast, so always remove the propeller for bench tests and fit it only once the direction is right. Watch the temperature after each run: if the motor is too hot to touch, use a smaller or lower-pitch propeller. Check that the shaft screw and prop adapter are tight before every flight.
2200 KV.
2S to 3S LiPo packs.
The motor and a prop adapter.
A 3.17 mm shaft, with sleeves for 5 and 6 mm propellers.
The title says 6T and the specification says A2212 10T, so rely on the 2200 KV figure.
| Brand | Generic |
|---|---|
| KV Rating | 2200.000000 KV |
| Shaft Diameter | 3.170000 mm |
| Selling unit | PCS |
