Sold out · Ask us about restocking
Not available to order right now.
This multi-system GNSS antenna combines GPS and GLONASS reception with a 3 m cable. It is suited to compact installations with GPS or GSM modules, Raspberry Pi HATs or Arduino shields, and it includes an internal magnet and optional adhesive mounting.
A patch antenna with a preamplifier does the receiving and amplification, and the enclosure is IP67 waterproof and UV resistant, with automotive-grade manufacturing quality.
The operating frequency is 1575 plus or minus 5 MHz. The gain is above 28 with the LNA, the noise figure is 1.5 dB, the voltage is 3 to 5 VDC and the current is about 15 mA. The impedance is 50 ohm, the connector is a male SMA and the black cable is 3 m of 18 AWG. It weighs 80 g.
It is also specified for GSM ranges of 824 to 894 and 1710 to 1880 MHz, which relates to its use alongside GSM modules. As with any active antenna, make sure your receiver supplies the antenna bias, and position the antenna where it has an open view of the sky.
Builders of vehicle trackers, IoT gateways and GPS/GSM devices that need an outdoor antenna on a long, heavy-duty cable.
Fix the magnetic base to a flat steel surface with a clear view of the sky, or use adhesive on a non-metal panel. Route the 3 m cable neatly and avoid sharp bends, especially near the connector. Because it is intended for GPS and GSM setups, keep the GPS antenna a few centimetres away from any cellular antenna to avoid interference.
3 metres of 18 AWG cable.
A male SMA connector.
3 to 5 VDC.
It has an IP67 rating and is UV resistant.
80 g.
| Brand | Generic |
|---|---|
| Antenna Connector | SMA male |
| Cable Length | 3 m cm |
| Frequency | 1575MHz |
| Gain | >28 dB (LNA) |
| Impedance | 50 ohm |
| Weight | 80.000000 g |
| Selling unit | PCS |
