1 / 4Sold out · Ask us about restocking
Not available to order right now.
This is a 14.8V 2200mAh 4S lithium polymer battery pack with a 40C continuous and 80C burst discharge rating. The listing describes it as a lithium polymer battery designed for RC applications including cars, quadcopters and airplanes.
The pack uses an XT-60 discharge connector and a JST-XH balance plug. The page lists its SKU as DTIFPS0079. At the time of the check the page showed the item as sold out.
14.8V 4S configuration: four cells in series for a nominal 14.8V.
2200mAh capacity: as listed on the page.
40C continuous / 80C burst: the listed discharge rating.
XT-60 discharge connector: a common connector for RC power systems.
JST-XH balance plug: for balance charging and cell monitoring.
Multi-purpose: the page lists RC cars, quadcopters and RC airplanes.
A LiPo (lithium polymer) drone battery stores energy in cells connected in series. The S number is the cell count, and each cell has a nominal voltage of 3.7V, so a 6S pack is 22.2V. Capacity in mAh tells you how much energy the pack holds, and the C rating tells you how much current it can deliver: multiply the C rating by the capacity in amp-hours to get the continuous current.
Match the pack to your aircraft. The voltage must suit your ESCs and motors, the connector must match your power system and the pack must be able to deliver the current that the propulsion system draws at full throttle. A pack that is asked for more current than its rating will heat up and lose life.
Handle LiPo batteries with care. Charge them with a balance charger set to the correct cell count and current, never leave them charging unattended, store them at a partial charge, never use a swollen or damaged pack and transport large packs in a fire-resistant container. Large packs also weigh a lot, so lift and mount them securely.
RC quadcopters
RC cars
RC airplanes
Replacing a matching 4S 2200mAh pack
Hobby power systems that use XT-60
The specification list gives 14.8V, 2200mAh, 4S (4 cells), JST-XH balance plug, XT-60 discharge connector and a 40C continuous / 80C burst rating. The page does not list dimensions or weight, so measure your battery bay before you buy.
Check that your ESC, motors and charger support 4S and this connector before you buy.
Battery voltage: 14.8V
Capacity: 2200mAh
Cell count: 4S (4 cells)
Balance plug: JST-XH
Discharge connector: XT-60
Discharge rating: 40C continuous / 80C burst
1 x 14.8V 2200mAh 4S 40C/80C LiPo battery pack
RC and drone builders who need a 4S 2200mAh LiPo pack with an XT-60 connector.
14.8V nominal (4S).
2200mAh.
40C continuous and 80C burst.
An XT-60 discharge connector and a JST-XH balance plug.
The page lists RC cars, quadcopters and RC airplanes.
| Brand | Generic |
|---|---|
| Balance Plug | JST-XH |
| Capacity | 2200.000000 mAh |
| Cell Configuration | 4S |
| Connector | XT-60 |
| Discharge Plug | XT-60 |
| Discharge Rate | 40C/80C |
| Nominal Voltage | 14.8V |
| Selling unit | PCS |
