1 / 5Sold out · Ask us about restocking
Not available to order right now.
The 1200TVL CMOS FPV camera uses a high-quality 1/3 inch colour Super HAD II sensor, which the listing says gives excellent image clarity and sharpness. It has a 2.1mm lens and is sold for racing drones and aerial photography.
The listed features are the PAL signal system, automatic gain control (AGC), backlight compensation (BLC), digital wide dynamic range (D-WDR), 2D noise reduction (2DNR) and a day/night mode that can be automatic, colour or black-and-white.
The specifications give a minimum illumination of 0.01 lux at F1.2, a signal-to-noise ratio of 60dB and an operating temperature of -10 to 50 degrees C.
1/3 Super HAD II sensor: sharp, clear 1200TVL images.
Low light: 0.01 lux at F1.2.
AGC and BLC: adjust to changing light and backlit scenes.
D-WDR and 2DNR: better contrast and less noise.
Day/night modes: auto, colour or black-and-white.
PAL: signal system.
An analog FPV camera sends a live composite video signal to the video transmitter on the drone. The image sensor turns light into an electrical signal, the camera processes it and outputs a video signal that the transmitter sends to your goggles. TVL (television lines) is a measure of horizontal resolution, and a bigger sensor usually collects more light, which helps in dim conditions.
The lens sets the field of view: a wider angle shows more of the scene and exaggerates the sense of speed, while a narrower angle shows a more natural picture. Features such as WDR (wide dynamic range) balance very bright and dark areas, DNR reduces noise and auto gain control adjusts the picture as the light changes. Low latency matters, because delay between what the camera sees and what you see makes flying harder.
Set the video standard (PAL or NTSC) to match your goggles, power the camera within its rated voltage range and mount it firmly so vibration does not blur the image. Tilt the camera up for fast, forward-pitched flying. Keep the lens clean and use a lens protector or ND filter where suitable.
Racing drones and multicopters
Aerial photography and videography
FPV camera replacements
PAL FPV systems
General RC FPV builds
The specification list gives a resolution of 1200TVL, a 1/3 CMOS Super HAD II sensor, a minimum illumination of 0.01 lux at F1.2, an S/N ratio of 60dB and an operating temperature of -10 to 50 degrees C. The page does not give the weight, dimensions or input voltage, so check them with the seller.
The package contains one 1200TVL CMOS FPV camera with a 2.1mm lens. The page showed 6 units in stock.
Resolution: 1200TVL
Sensor: 1/3 CMOS Super HAD II
Lens: 2.1mm
Signal: PAL
Min illumination: 0.01 lux / F1.2
S/N ratio: 60dB
AGC, BLC, D-WDR, 2DNR
Day/night: auto / colour / B&W
Operating temperature: -10 to 50 C
1 x 1200TVL CMOS FPV camera, high definition, 2.1mm lens
FPV builders who want a low-cost 1200TVL PAL camera.
1200TVL.
2.1mm.
A 1/3 Super HAD II CMOS.
PAL.
0.01 lux at F1.2.
Yes, D-WDR.
| Brand | Generic |
|---|---|
| Display Resolution | 1200TVL |
| Operating Temperature | -10 to 50 C |
| Sensor | 1/3 CMOS Super HAD II |
| Video System | PAL |
| Selling unit | PCS |
