Sold out · Ask us about restocking
Not available to order right now.
This DWIN 10.1 inch HMI display has a 1024 x 600 IPS panel, capacitive touch, a TTL/RS232 interface, 16 MB of flash, a buzzer and an SD interface. It is built on DWIN's T5L ASIC with the DGUS II GUI software, so you can design an interface without coding.
The maker notes that it is widely used with Arduino, STM32, Microchip and ESP8266 controllers.
The panel gives 24-bit colour (16.7 million), a wide 85/85/85/85 degree viewing angle and 220 nit brightness, with a display area of 222.7 x 125.3 mm. The supply is 12 V at 1 A DC, the buzzer is a 3 V passive type, the SD interface uses FAT32 and the unit weighs 545 g.
HMI displays run their own screen software, so your microcontroller only sends short serial commands. Design the pages in DWIN's DGUS tool, copy the files to a FAT32 SD card to load them and test the display on a bench with a stable supply before you fit it into a product.
Builders of larger control panels, dashboards and machine interfaces who need a big capacitive screen driven by a simple serial link.
Because a 10 inch panel is heavy and needs a steady 12 V supply, mount it on a rigid bracket and use a power supply with a little headroom. Keep the serial cable short or shielded in noisy environments, and test touch calibration and response before you seal the enclosure.
10.1 inches and 1024 x 600.
Capacitive.
12 V at 1 A DC.
Any with a TTL or RS232 serial port, such as Arduino, STM32, Microchip and ESP8266.
545 g.
| Brand | DWIN |
|---|---|
| Display Resolution | 1024x600 |
| Flash Memory | 16MB |
| Power Supply | 12V 1A DC |
| Screen Size | 10.1 inch |
| Touch Screen | Capacitive |
| Weight | 545.000000 g |
| Selling unit | PCS |
